Can resinoid cut-off wheels be used wet?


Yes, but only if the blue pictogram (see below), which indicates that the wheel must be used wet, is placed on the wheel. Please note that for this type of wheels, resinoid cut-off wheels, it is mandatory for producers to put the pictogram on the wheel.

If you see the pictogram, please turn off the water supply and spin out excess water from the wheel before turning off the machine.

Warning: never use wet a wheel marked with the pictogram "Do not use for wet cutting". The wheel is not designed for this, it could be damaged or burst causing severe injuries.

pictogram do not use wet  Do not use for wet cutting

pictogram only use wet  Must be used wet